praetorian? 6-channel emi filter array with esd protection CM1453-06CP ?2010 scillc. all rights reserved. publication order number: april 2010 rev. 2 CM1453-06CP/d features ? six channels of emi filtering ? 15kv esd protection ? (iec 61000-4-2, contact discharge) ? 30kv esd protection (hbm) ? greater than -40db of attenuation at 1ghz ? chip scale package (csp) with 0.40mm pitch and 0.25mm csp solder ball which features extremely low parasitic inductance for optimum filter and esd performance ? optiguard ? coating for improved reliability at assembly ? rohs compliant applications ? lcd and camera data lines in mobile handsets ? i/o port protection for mobile handsets, notebook computers, pdas etc. ? emi filtering for data ports in cell phones, pdas or notebook computers. ? wireless handsets ? handheld pcs/pdas ? lcd and camera modules product description the CM1453-06CP is a pi-style emi filter array with esd protection, which integrates filters (c-l-c) in csp form factor with 0.40mm pitch. each emi filter channel of the CM1453-06CP is implemented as a 3- pole l-c filter where the component values are 9.5pf-20nh-9.5pf. the roll-off frequency at -6db attenuation is 380mhz and can be used in applications where the data rates are as high as 160mbps while providing greater than -35db over the 800mhz to 2.7ghz frequency range. the parts include esd diodes on every i/o pin, and provide a high level of protection against electrostatic discharge (esd). the esd protection diodes connected to the filter ports are designed and characterized to safely dissipate esd strikes of 15kv, beyond the maximum requirement of the iec61000-4-2 international standard. using the mil-std-883 (method 3015) specification for human body model (hbm) esd, the pins are protected for contact discharges at greater than 30kv. this device is particularly well suited for wireless handsets, mobile lcd modules and pdas because of its small package form at and easy-to-use pin assignments. in particular, the CM1453-06CP is ideal for emi filtering and protecting data and control lines for the lcd display and camera interface in mobile handsets. the CM1453-06CP incorporates optiguard ? which results in improved reliability at assembly. it is manufactured with a 0.40mm pitch and 0.25mm csp solder ball to provide up to 28% board space savings vs. competing csp devices with 0.50mm pitch and 0.30mm csp solder ball.
CM1453-06CP rev. 2 | page 2 of 10 | www.onsemi.com electrical schematic m 1 of 6 channels pin descriptions pin number pin description pin number pin description a1 filter #1 c1 filter #1 a2 filter #2 c2 filter #2 a3 filter #3 c3 filter #3 a4 filter #4 c4 filter #4 a5 filter #5 c5 filter #5 a6 filter #6 c6 filter #6 b1 gnd ? b2 gnd ? b3 gnd ?
CM1453-06CP rev. 2 | page 3 of 10 | www.onsemi.com ordering information part numbering information lead-free finish bumps package ordering part number 1 part marking 15 csp CM1453-06CP n536 note 1: parts are shipped in tape & reel form unless otherwise specified. specifications absolute maximum ratings parameter rating units storage temperature range -65 to +150 c dc current per inductor 30 ma dc package power rating 0.5 w standard operating conditions parameter rating units operating temperature range -40 to +85 c
CM1453-06CP rev. 2 | page 4 of 10 | www.onsemi.com electrical operat ing characteristics (note 1 ) symbol parameter conditions min typ max units l tot total channel inductance 20 nh c tot total channel capacitance (c 1 x 2) 2.5v dc; 1mhz, 30mv ac 15.2 19 22.8 pf c 1 capacitance 2.5v dc; 1mhz, 30mv ac 9.5 pf v st stand-off voltage i = 10 a 5.5 v i leak diode leakage current v in = 3.3v 0.1 1.0 a v sig signal clamp voltage positive clamp negative clamp i load = 10ma i load = -10ma 5.6 -1.5 6.8 -0.8 9.0 -0.4 v v v esd in-system esd withstand voltage a) human body model, mil-std-883, method 3015 b) contact discharge per iec 61000-4-2 level 4 notes 2 and 3 30 15 kv kv f c cut-off frequency z source = 50 , z load = 50 300 mhz f c roll-off frequency at -6db attenuation z source = 50 , z load = 50 380 mhz r dyn dynamic resistance positive negative 2.3 0.9 note 1: t a =25 c unless otherwise specified. note 2: esd applied to input and output pins with respect to gnd, one at a time. note 3: unused pins are left open.
CM1453-06CP rev. 2 | page 5 of 10 | www.onsemi.com performance information typical filter performance (nominal conditions unless specified otherwise, 50 ohm environment) figure 1. i nsertion loss vs. fre quency (cm1453-06: filter 1) figure 2. i nsertion loss vs. fre quency (cm1453-06: filter 2)
CM1453-06CP rev. 2 | page 6 of 10 | www.onsemi.com performance information (cont?d) typical filter performance (nominal conditions unless specified otherwise, 50 ohm environment) figure 3. insertion loss vs. fre quency (cm1453-06: filter 3) figure 4. insertion loss vs. fre quency (cm1453-06: filter 4)
CM1453-06CP rev. 2 | page 7 of 10 | www.onsemi.com performance information (cont?d) typical filter performance (nominal conditions unless specified otherwise, 50 ohm environment) figure 5. insertion loss vs. frequen cy (cm1453-06: csp1 ? filter 5) figure 6. insertion loss vs. frequen cy (cm1453-06: csp1 ? filter 6)
CM1453-06CP rev. 2 | page 8 of 10 | www.onsemi.com performance information (cont?d) figure 7. typical diode ca pacitance vs. input voltage (normalized to 2.5v d.c) application information refer to application note ap-217, "the chip scale package", for a detailed description of chip scale packages offered by california micro devices. see http://www.wlcspforum.org/documents/pdf/ap-217.pdf for download.
CM1453-06CP rev. 2 | page 9 of 10 | www.onsemi.com mechanical specifications cm1453 devices are packaged in custom chip scale pa ckages (csp). see application note ap-217 for more information at: http://www.wlcspforum.org/documents/pdf/ap-217.pdf . package dimensions package custom csp bumps 15 millimeters inches dim min nom max min nom max a1 2.429 2.474 2.519 0.095 6 0.0974 0.0992 a2 1.099 1.144 1.189 0.043 3 0.0450 0.0468 b1 0.395 0.400 0.405 0.015 6 0.0157 0.0159 b2 0.195 0.200 0.205 0.007 7 0.0079 0.0081 b3 0.342 0.347 0.352 0.013 5 0.0137 0.0139 b4 0.342 0.347 0.352 0.013 5 0.0137 0.0139 c1 0.187 0.237 0.287 0.007 4 0.0093 0.0113 c2 0.175 0.225 0.275 0.006 9 0.0089 0.0108 d1 0.545 0.615 0.685 0.021 5 0.0242 0.0270 d2 0.368 0.419 0.470 0.014 5 0.0165 0.0185 # per tape and reel 3500 pieces controlling dimension: millimeters package dimensions for CM1453-06CP chip scale package
CM1453-06CP rev. 2 | page 10 of 10 | www.onsemi.com csp tape and reel specifications part number chip size (mm) pocket size (mm) b 0 x a 0 x k 0 tape width w reel diameter qty per reel p 0 p 1 CM1453-06CP 2.47 x 1.14x 0.615 2.59 x 1.27 x 0.73 8mm 178mm (7") 3500 4mm 4mm + + + on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes witho ut further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any pr oduct or circuit, and specific ally disclaims any and all liability, including without li mitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or spec ifications can and do vary in different applications and actu al performance may vary over time. all operating parameters, including ?typicals? must be validated for each custom er application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not de signed, intended, or authorized for use as components in systems intended for surg ical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reason able attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303-675-2175 or 800-344-3860 toll free usa/canada fax : 303-675-2176 or 800-344-3867 toll free usa/canada email : orderlit@onsemi.com n. american technical support : 800-282-9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81-3-5773-3850 on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
